Table of Contents
Ham is the most misunderstood cut on the smoker. People buy a spiral-sliced, fully cooked ham at the supermarket, put it on the grate for three hours, and wonder why it comes out dry and salty. Others buy a fresh ham, treat it like a pork butt, and pull it at 200°F, which turns it into something closer to jerky than to the pink, juicy slices they wanted.
The confusion is understandable, because the word "ham" covers at least four different products that need four different approaches. A fresh ham is raw pork that must be cooked through. A cook-before-eating ham is cured but still raw in the center. A fully cooked ham only needs reheating. A country ham is salt-cured and dry enough to be sliced like prosciutto. Smoking works for all of them, but the temperatures and times are not interchangeable.
Once you know which ham you have, the rest is straightforward: a mild fire, a glaze applied late, a thermometer instead of a clock, and a rest before slicing. This is the method I use for holiday hams, and it produces meat that is pink all the way through, moist at the center, and lacquered at the edges.
Know which ham you bought
Read the label before anything else. "Fully cooked" means the ham was cooked at the plant and is safe to eat cold. You are reheating and adding smoke, not cooking it from raw. "Cook-before-eating" means it was cured but not fully cooked; it must reach 145°F with a three-minute rest. "Fresh ham" is uncooked pork leg, usually labeled "fresh ham" or "green ham," and it needs a full cook to 145°F, plus more time for the collagen to loosen.
Then there is the curing method. Most supermarket hams are wet-cured, injected with a brine of salt, sugar, and sodium nitrite, which gives them their pink color and ham flavor. Dry-cured country hams are packed in salt for weeks and are intensely salty; they are usually sliced thin and fried, not smoked whole. If you have a country ham, do not treat it like a holiday ham. It will be inedibly salty.
Spiral-sliced hams deserve their own warning. They are fully cooked, presliced on a machine, and prone to drying out because every slice exposes a cut surface to the heat. If you smoke one, keep the temperature low, glaze it late, and pull it as soon as it reaches 140°F. A whole, uncut ham holds moisture far better.
Choosing the right cut
For smoking, I look for a bone-in, uncut, fully cooked ham in the 8- to 12-pound range, with the shank end rather than the butt end. The shank end has a higher ratio of meat to fat and slices into neat rounds. The butt end is fattier and a little harder to carve, though it is more forgiving if you tend to overshoot the temperature.
Bone-in beats boneless for flavor and moisture, because the bone slows heat transfer at the center and the surrounding connective tissue bastes the meat as it renders. Boneless hams are easier to slice and take less time, which makes them a reasonable choice for a weeknight. For a holiday, bone-in is worth the extra ten minutes of carving.
Size matters for more than yield. A 12-pound ham at 250°F takes about three and a half to four hours. A 20-pound ham takes closer to six, and the outside dries out while the center comes up to temperature. If you need more than 12 pounds of meat, smoke two smaller hams rather than one large one. They will both be better.
Prep: rinse, dry, score
Fully cooked hams often come packed in a salty brine or a gelatinous glaze. Rinse the surface under cool water for a minute, then pat it completely dry with paper towels. If the ham has a thick rind or a layer of hard fat, trim it down to about a quarter inch, leaving enough fat to protect the meat and carry the glaze.
Scoring is what turns a ham from a pink blob into a presentation piece. Use a sharp paring knife to cut a diamond pattern about a quarter inch deep through the fat, spacing the cuts an inch apart. Do not cut into the meat. The diamonds open as the ham heats, catch the glaze, and give you crisp edges.
If you are using a wet brine or an injection for a fresh ham, do it the night before. For a cured ham, skip the brine entirely; it is already salty. A dry rub applied the night before and left uncovered in the fridge will give you a better surface, but keep the salt low. My comparison of dry brine versus wet brine explains why cured meat does not need either in the traditional sense.
Let the ham sit at room temperature for 45 minutes before it goes on the smoker. A cold ham drops your chamber temperature and cooks unevenly at the center.
A glaze that works at smoking temperatures
Most ham glazes are sugar, acid, and a flavor base. My standard ratio is one cup of brown sugar, two tablespoons of Dijon mustard, a quarter cup of cider vinegar, and a quarter cup of bourbon or apple juice. Whisk it together cold and taste it. It should be sharp enough that you want to eat it with a spoon, because the sweetness mellows as it caramelizes.
Do not apply the glaze at the start. Sugar burns at smoker temperatures long before the ham is done, and a black crust tastes bitter. Brush on the first coat when the ham reaches 120°F, about 30 to 45 minutes before it comes off. Apply three coats, 10 to 15 minutes apart, and let each one set before adding the next.
If you want a deeper lacquer, add a tablespoon of honey or molasses to the base. If you want heat, a teaspoon of cayenne or a tablespoon of hot sauce works without overpowering the meat. A mustard-based glaze is more forgiving than a pure sugar glaze because the mustard solids slow the burn. My guide to homemade BBQ sauce styles has more on balancing sweet, acid, and heat if you want to build your own.
Setting up the smoker for ham
Run the smoker at 250°F to 275°F. Lower than 225°F and the cook stretches past five hours, which dries the exterior. Higher than 300°F and the glaze scorches before the center is hot. A steady 250°F with a water pan is the easiest target to hold.
Cook indirect. On a kettle, bank the coals to one side and put the ham on the cool side with a drip pan underneath. On an offset, place the ham at the far end from the firebox and rotate it every hour. On a pellet grill, set 250°F and use a smoke tube only if you want extra flavor; the ham already has plenty.
Wood choice should be mild and sweet. Apple and cherry are my defaults, with pecan for a richer flavor on a plain fresh ham. Hickory works if you use it sparingly, but mesquite is too strong for cured meat. Two or three chunks is enough for a four-hour cook. The pairing logic is the same one I use for poultry, and it is covered in smoking woods explained.
Keep the exhaust open and control temperature with the intake. A smoldering fire produces thick white smoke that coats the ham in creosote, and cured meat absorbs it quickly. You want thin blue smoke or nothing visible at all. If the smoke smells sharp in your nose, it is not ready.
Time and temperature by ham type
These are the numbers I plan around, with a thermometer as the final authority.
- Fully cooked, bone-in, 10 to 12 pounds: 250°F for 3 to 3.5 hours, until the center reads 140°F. You are reheating, not cooking.
- Fully cooked, spiral-sliced: 250°F for 2 to 2.5 hours, until 140°F. Check early and often; the slices dry fast.
- Cook-before-eating, bone-in: 250°F for 3.5 to 4.5 hours, until 145°F in the deepest part, then rest 3 minutes.
- Fresh ham, 10 to 12 pounds: 275°F for 4.5 to 5.5 hours, until 145°F with a 3-minute rest. The collagen needs the extra time and heat.
Insert the probe into the thickest part of the meat, away from the bone and away from any fat pocket. Bone conducts heat and will give you a false high reading. Check two spots on a large ham, one near the shank and one near the center, because the shape is uneven.
For a fully cooked ham, 140°F is the safe reheating target under USDA guidance. I take mine to 145°F because the texture at the center is better and the margin is safer. For fresh and cook-before-eating hams, 145°F with a three-minute rest is the minimum, and I do not pull below it. The full target chart is in my meat doneness temperature guide.
The twice-smoked ham
A twice-smoked ham is a fully cooked ham that gets a second pass in the smoker, usually with a glaze, to build bark and deepen the flavor. It is the technique behind most of the "smoked ham" you see at barbecue joints, and it is nearly foolproof because the meat is already safe to eat.
Start with a good-quality fully cooked ham, score it, and smoke it at 250°F for about two hours. Brush on the glaze in three coats during the last 45 minutes, and pull it at 140°F to 145°F. Rest it for 20 minutes before slicing. The result is a ham with a mahogany crust, a sticky glaze, and meat that is still moist because it never went past reheating temperature.
If you want to smoke a ham from scratch, use a fresh ham and plan on a much longer cook. The technique is closer to a pork roast than to a holiday ham, and the reward is a deeper, more pork-forward flavor. Just do not expect the pink, cured color; that comes from the cure, not the smoke.
Slicing so every piece stays juicy
Rest the ham for 20 to 30 minutes before carving. This is the same principle that applies to any large roast: the juices need time to redistribute, and a ham sliced hot will release a surprising amount of liquid onto the board. The case for resting meat is the same here.
If the ham is bone-in, stand it on the flat end and cut down along the bone to remove one whole side. Then lay that piece flat and slice across the grain into quarter-inch slices. Repeat on the other side. For a spiral-sliced ham, follow the existing cuts with a thin knife and pull the slices away from the bone as you go.
The shank end slices into neat rounds; the butt end is more irregular and better for cubing. Cut the slices a little thicker than you would for turkey, about a quarter inch, because ham is denser and thin slices tear. Keep the glaze side up on the platter so the lacquer stays visible.
If you are serving a crowd, slice one side and leave the other intact. Sliced ham dries out within 30 minutes at room temperature, while a whole piece holds moisture for hours. The same batch-thinking applies to any large roast, and the carving sequence for a bird is in how to carve a turkey if you are doing both for a holiday table.
Troubleshooting dry, salty, or stubborn hams
Dry ham. Almost always overcooked or sliced too early. A fully cooked ham only needs to reach 140°F. If you took it to 160°F, the muscle fibers contracted and squeezed out the moisture. Serve it with a sauce or use it in soup.
Too salty. Cured hams vary widely in salt content. Soaking a store-bought ham in cold water for 12 to 24 hours, changing the water twice, pulls out some salt. Do not add salt to the glaze or rub.
Glaze burning. Sugar plus direct heat equals carbon. Apply the glaze late, keep the ham indirect, and tent the top with foil if the crust darkens too fast.
Uneven temperature. Bone-in hams have a cold spot near the bone and a hot spot near the shank. Rotate the ham and check two locations. If one end is done, tent it with foil and keep going.
Stall. Fresh hams stall around 150°F to 160°F just like pork shoulder. Do not raise the heat; wrap the ham in foil and let it push through, or plan a longer cook.
Serving, holding, and leftovers
Serve ham warm or at room temperature. Hot holding above 140°F is safe for up to two hours; after that, the meat dries out even if it stays safe. If you need to hold it longer, keep it whole and covered in a 150°F oven, then slice to order.
Leftover ham is one of the best ingredients in the kitchen. It holds for three to four days in the fridge, freezes well in slices, and improves beans, greens, split pea soup, and sandwiches. Reheat leftovers to 165°F. Do not leave sliced ham out on the counter for more than two hours, especially if the room is warm.
If you are planning a holiday meal around the ham, the timing logic in the Thanksgiving grill timing plan applies to any large centerpiece: cook the long item first, hold it warm, and build the sides around it. A ham is easier than a turkey because it is already cooked, so the grill can do double duty for sides while the ham rests.
Smoked ham is one of the most reliable large cooks you can put on a grill, provided you match the method to the label. Reheat a fully cooked ham gently, cook a fresh ham to 145°F, glaze late, and rest before slicing. The result is a lacquered, smoky centerpiece that tastes like a lot more work than it was. And unlike turkey, it gives you a second meal that might be better than the first.
Frequently Asked Questions
What temperature should I smoke a ham at?
Run the smoker at 250°F to 275°F. That range reheats a fully cooked ham in three to three and a half hours and gives a fresh ham enough time to render without drying the exterior. Cook indirect with a drip pan underneath.
How long does a 10-pound ham take to smoke?
A fully cooked bone-in ham takes about three to three and a half hours at 250°F to reach 140°F. A fresh ham of the same size takes four and a half to five and a half hours at 275°F. Always confirm with a thermometer in the thickest part, away from the bone.
Do I need to cook a fully cooked ham?
You do not need to cook it for safety, but you do need to reheat it to at least 140°F if you are serving it hot. I take mine to 145°F because the texture at the center is better. The smoker is adding flavor and a glaze, not cooking raw meat.
What wood is best for smoking ham?
Apple and cherry are the safest choices, with pecan for a richer flavor on a fresh ham. Use two or three chunks, because cured meat absorbs smoke quickly. Hickory works in small amounts, but mesquite is too strong.
When should I glaze a smoked ham?
Start glazing when the ham reaches about 120°F, roughly 30 to 45 minutes before it comes off. Apply three thin coats, 10 to 15 minutes apart, so each layer sets. Glazing at the start burns the sugar before the center is hot.
How do I keep smoked ham from drying out?
Do not take a fully cooked ham past 145°F, and rest it for 20 to 30 minutes before slicing. Keep it covered after it comes off the smoker. Spiral-sliced hams dry fastest, so check them early and pull as soon as they reach temperature.
Can I smoke a spiral-sliced ham?
Yes, but treat it gently. It is fully cooked and already sliced, so it only needs reheating to 140°F, usually two to two and a half hours at 250°F. Glaze late and cover the cut face with foil if it starts to dry.
What internal temperature should a fresh ham reach?
A fresh ham is uncooked pork and must reach 145°F in the thickest part, followed by a three-minute rest. Do not pull it at 140°F and hope for carryover. If you want the collagen softer, cook it to 150°F to 155°F, but expect a firmer slice.
See Also
- How to Smoke a Turkey: Temperature, Wood, and Timing
- Thanksgiving Turkey Brine Timeline: When to Start for a Juicy Bird
- How to Carve a Turkey So Every Slice Stays Juicy
- Smoking Woods Explained: How to Pair Wood Types with Meat, Poultry, and Seafood
- Meat Doneness Temperatures: The Complete Internal Temperature Guide for 2026